- VERMONT CASTING Stardance DIRECT VENT/NATURAL VENT GAS HEATER OPERATING MANUAL SDDVTCEB, SDDVTCMB, SDDVTCVG

5
Stardance Direct Vent/Natural Vent Gas Heater
20012734
Stardance Direct Vent / Natural Vent Dimensions
26"
(680 mm)
25"
(654 mm)
14"
(355 mm)
3"
(76 mm)
C
L
12734
Stardance dim
8/07 djt
Supply Inlet
9"
(229 mm)
C
L
7" Outer Dia.
(178 mm)
Flue Collar
L
C
Supply Inlet
SDDVT Models
8"
(203 mm)
7" Outer Dia.
(178 mm)
Flue Collar
L
C
Supply Inlet
SDDVTC Models
7”
(197 mm)
8"
(222 mm)
2”
(73 mm)
12”
(321 mm)
2”
(73 mm)
12”
(321 mm)
Attention
The Stardance stove is shipped from the factory as a Direct Vent Gas Heater. This heater
may be converted into a Natural Vent unit in the field. If a Natural Vent heater is desired,
the Vermont Castings Z31B00 FSDHAG Draft Hood must be directly installed to the top
of the unit according to the installation instructions. The Draft Hood Adapter is available
in the 7FSDHASK stove kit or as a separate item.
When the Stardance stove is converted to Natural Vent, it uses 4” vent pipe. For aes-
thetic purposes the CFM direct vent system may be used up to the ceiling.
Fig. 1 Stardance dimensions.