Assembly Instructions
91D0004
VCS300SSBI/500SSBI Series Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or
moving the grill is recommended.
Step 1: Unpack Carton and Verify Contents
Use a sharp cutting tool to cut the straps on the packaging and then lift off the carton top. The sleeve sur-
rounding the barbecue can be removed by lifting it straight up and over the top of the unit. Remove the
protective plastic coverings from the metal parts. Be careful not to scratch or damage the finish of the metal
parts when removing the protective plastic. Compare all contents to the parts list and the carton content
lists below. Refer to the parts list for fastener detail.
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly is strongly
recommended.
8
5
6
3
4
2
1
#!2
6#3")CONTENTS
9
7
10
VCS300SSBI Carton Contents
1. Spit Rod 5000136
. Grease Tray 50001955
3. Cover Rear 50004739
4. Front Grease Tray Assy 5000483
5. Firebox Assy 500048
6. Lid Assembly
Box 7 (50004737)
Hardware Bag
Bracket Right
Bracket Left
Handle
Knob Long Stem (4)
Battery “AAA”
Support Battery Holder
Battery Case
Heat Plate (3)
Box 8 (50004564)
Cook Grates ()
Box 9 (50004801)
Rotisserie Kit
Box 10 (50004555)
Smoker Box