Operating instructions
38
83D4009
VLI31 Fireplace Insert
Make sure the gas valve knob is in the “OFF” position. Wait at least ve (5) minutes before
start-ing maintenance.
A qualied agency should examine the venting system annually.
Clean the ceramic glass periodically. Condensation will sometimes form on the glass during a
cold startup. This is normal for all gas replaces and inserts. This condensation often attracts
dust and lint to the surface of the glass. The initial paint curing of the appliance can also leave
a slight lm on the glass. This is a temporary problem.
You should clean the glass after the rst two weeks of use. After that, you should clean the
glass no more than two or three times a season. Use a mild glass cleaner to clean the door.
Do not use abrasive cleaners. They will damage the glass surface.
Visually check pilot and burner ames periodically. Refer to Figure 44 for typical burner ame.
Refer to Figure 45 for typical pilot ame.
FP2453
hooded pilot flames
Sensor
Thermopile
FP453
Figure 45 -
Typical Pilot Flame
Figure 44 -
Typical Burner Flame
LG835
VLI31 log flame
LG836