User's Manual

Getting Started with LabQuest
®
3
6
Connecting Sensors
Wired Sensors
Connect your wired sensor to the appropriate sensor
port. LabQuest App will automatically set the default
collection rate for the sensor.
Analog Sensor Ports (CH 1, CH 2 and CH 3) – LabQuest has three sensor ports for analog
sensors such as our pH Sensor, Temperature Probe, and Force Sensor. Also included are two
full-size USB ports for USB sensors such as spectrometers, USB flash drives, and other USB
peripherals.
Digital Sensor Ports (DIG 1 and DIG2) – LabQuest has two digital sensor ports for Motion
Detectors, Drop Counters, and other digital sensors.
Full-sized USB Ports–LabQuest has two full-size USB ports for USB sensors such
Go Direct sensors, Go!Temp, and Go! Motion. These ports can also be used with USB flash
drives and other peripherals.
Additional ports (not for use with sensors)
Audio out port – This port is for use with our Power Amplifier, headphones, or speakers.
Micro-USB port – This port is for using LabQuest as a sensor interface with a computer or
Chromebook™.