User's Manual

LabQuest

3 – User Manual

FFT – FFTs or Fast Fourier Transforms are

typically used when analyzing Microphone

data. The tool calculates the FFT of the selected

data. The results are displayed in a separate

graph that can be analyzed.

For more information, see

www.vernier.com/til/2310

o Peak Integration – This tool is most commonly

used with the Vernier Mini GC, but it can be

applied to any data plot. It calculates the

integral for a selected portion of a graph. Peak

Integration differs from the Integral tool in that

it does not use the x-axis as the baseline.

Instead, the integral for Peak Integration is

evaluated using the minimum y-values to the

left and right of a selected peak.

o Pivot Data – This tool is only available in Data

Matrix mode. It transposes the rows (graphed as

the x-axis data typically 0100representing the

sampling site) with the runs (the datasets

typically representing the sampling day).

With this tool you can view the daily data as the

location changes, or pivot the data and view the

location data as the day changes.

Draw Prediction – The Draw Prediction tool is a free-hand sketch tool for drawing on the

Graph screen. This can be used for a variety of purposes, but is most often used to sketch a

prediction of how a graph will appear once data are subsequently collected.