User's Manual

LabQuest® 3 – User Manual
41
c.
Verify LabQuest is attempting to create a network. The network status should
indicate
Connecting.
d.
Verify LabQuest has successfully created a
network. The network status should change to a
numeric IP address.
When LabQuest has successfully created a
network, tap OK to return to the Connections
app.
TIP! Some Android implementations have trouble viewing and connecting to ad-hoc networks.
These devices require the use of an existing (infrastructure) network.
Enable Data Sharing on LabQuest
In addition to connecting to a Wi-Fi network, you will need to set up LabQuest as a Data Sharing
Source using the following instructions.
1. Launch the Connections app from the Settings screen.
2. To easily identify this LabQuest unit, it is
recommended you give your LabQuest a unique
name. To do this, tap the Name field edit icon.