User's Manual

LabQuest® 3 – User Manual
43
2. Within the Advanced Preferences dialog box, tap the
Network tab.
3. Select Connections app lockdown and then tap Edit
Preference.
4. Select the desired setting.
TIP! Changes to the Connections main screen will
not show if the lockdown mode is changed while the
Connections app is running. Tap to close the
application, then launch the Connections app again.
Connect to LabQuest 3 from Your Device
After setting up LabQuest as a Data Sharing source, you can connect to this LabQuest from your
computer, Chromebook™, tablet, or smartphone.
Access LabQuest 3 Data Using Graphical Analysis™ 4

1. Connect your Chromebook or mobile device to the same Wi-Fi network to which you
connected LabQuest 3.
2. Launch Graphical Analysis on your computer, Chromebook, tablet or phone.
3. From the New Experiment dialog, select Data Sharing. Discovered Data Sharing Sources will
be listed automatically.
4. Tap the name of the LabQuest 3 source to connect. If your LabQuest 3 source is not listed in
Data Sharing sources, you can connect by choosing Specify Source and manually entering
the LabQuest Data Sharing source address or by scanning the QR Code.