User's Manual

Projecting and Monitoring Students’ LabQuest
®
3 Devices
50
3.
Tap the Viewer settings
icon
to open the Viewer Settings dialog box.
4. Enable LabQuest Viewer (On).
5. Select the check box to Allow screen control.
6. Tap OK to exit the LabQuest Viewer settings.
TIP! If Wi-Fi is not available, you can Enable Viewer over USB to connect with the
LabQuest Viewer computer software via USB. While this option is selected, your LabQuest
cannot be used as a USB interface with Logger Pro 3, Graphical Analysis 4 or Logger Lite
computer software.