Technical data

19
Verona CR 43
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
Radio Section
Selection of the Desired Wave-
band
This radio allows you to choose between the
FM, MW and LW wavebands.
FM Selection
• Briefly press the FM•T button ?.
“FM” is displayed in the display (for
Frequency Modulation).
MW or LW Selection
• Briefly press the M•L rocker switch >.
An “M” (for MW), or an “L” (for LW) will
then appear in the display.
If you wish to switch between MW and LW:
• press the M•L rocker switch > again.
The following instructions apply for all wave-
bands, as long as not otherwise indicated.
Automatic Station Tuning
Tuning of Subsequent Station
• Press rocker switch / 2 up. The
radio will automatically seek the next
station.
Amplifier Section
ON/OFF
For switching the set on,
• turn button 1 .
Your stereo is now ready for operation.
For switching the set off,
• turn button 1
.
Volume control
• turn button 1.
Balance control
Use button 1 to balance the sound impres-
sion of the right and left channel speaker.
• Pull (lock in) button and turn.
After the adjustment
• slightly press button.
Fader control
If four loudspeaker are connected, the front/
rear sound impression of the loudspeakers
(fader) can also be modified using lever C.
Adjusting trebles
• turn button A.
Adjusting basses
• turn button B.