Owner manual

ManualsBrandsVersa-Matic ManualsHardwareVDA10 Metallic and Non-Metallic Surge Dampeners

SERVICE & OPERATING MANUAL

Original Instructions

Model VDA05

Model VDA07

Model VDA10

Metallic and Non-Metallic

Surge Dampeners

Table of Contents

Principle of Operation ............................................................................ 1

Temperature Limitations ........................................................................1

Installation & Startup .............................................................................1

Service & Warranty ................................................................................1

Dimensions ............................................................................................2

Installation Guide ...................................................................................3

Repair Parts List ....................................................................................4

Repair Parts Drawing ............................................................................5

CE Declaration of Conformity - Machinery ............................................6

Quality System

ISO9001 Certied

Environmental

Management System

ISO14001 Certied

Versa-Matic • A Unit of IDEX Corporation • 800 N. Main St., Manseld, Ohio 44902 USA

Telephone (419) 526-7296 • Fax (419) 526-7289 • www.versamatic.com

vVDA050710sdsm-rev0512

Summary of content (8 pages)

PAGE 1
SERVICE & OPERATING MANUAL Original Instructions Quality System ISO9001 Certified Environmental Management System ISO14001 Certified Model VDA05 Model VDA07 Model VDA10 Metallic and Non-Metallic Surge Dampeners Table of Contents Principle of Operation.............................................................................1 Temperature Limitations.........................................................................1 Installation & Startup..........................................................
PAGE 2
PAGE 3
SERVICE AND OPERATING MANUAL Model VDA05 ½" Surge Dampener Model VDA07 ¾" Surge Dampener Model VDA10 1" Surge Dampener The Versa-Matic Surge Dampener reduces flow and pressure pulsation which is characteristic of reciprocating pumps. PRINCIPLE OF OPERATION The surge dampener uses a flexible virgin PTFE diaphragm to separate a liquid chamber from a compressed air chamber. After the dampener is manually charged with air, the diaphragm strokes at the same rate as the pump strokes.
PAGE 4
DA05 1/2 NPT (BSP) THREADED PORT VDA05 Metallic and Non-Metallic 1/2 NPT (BSP) THREADED PORT DA07 3/4 NPT (BSP) THREADED PORT VDA07 3/4 NPT (BSP) THREADED PORT VDA10 Models VDA05, VDA07, VDA10 Page 2 vda050710sdsm-rev0512
PAGE 5
INSTALLATION GUIDE Top Discharge Ball Unit From Available from Versa-Matic Warren Rupp, Inc. CAUTION The air exhaust should be piped to an area for safe disposition of the product being pumped, in the event of a diaphragm failure.
PAGE 6
REPAIR PARTS LIST Model VDA05 ½" Surge Dampener Model VDA07 ¾" Surge Dampener Model VDA10 1" Surge Dampener ITEM NO.
PAGE 7
Repair parts Drawing Supplied with regulator 13 3 12 4 11 10 16 11 10 16 DA10 only 1" ANSI ﬂange Nameplate location 5 2 14 7 * Diaphragms must be installed as shownwith convolutions facing the outer chamber.
PAGE 8
Declaration of Conformity Manufacturer: Versa-Matic , Warren Rupp, Inc., 800 N. Main Street, P.O. Box 1568, Mansfield, Ohio, 44901-1568 USA Certifies that Air-Operated Double Diaphragm Pump Series: Non-Metallic E Series, VTA Series Metallic Surge Suppressors and VDA Non-Metallic Surge Dampeners comply with the European Community Directive 2006/42/EC on Machinery, according to Annex VIII.