Safety Guide

Cloud Services Gateway 700 Series
Ó 2019 Versa Networks, Inc.
12
The Reset button is recessed so that it is not accidentally pressed while the appliance is
operational.
To press the Reset button, use a sharp narrow tool. Each time you press the Reset button, you
hear a buzzer sound.
Table 3: Reset Button Press Behavior
Number of
Presses
Behavior
2
Reset the appliance to the factory-default snapshot.
4
Reset the appliance to the branch prestaging configuration.
6
Reset the appliance to the branch staging configuration.
8
Reset the appliance to branch post-staging configuration.
Kensington Security Lock
The Kensington security lock on he rear panel of a CSG700 series appliance is a small metal-
enforced hole for attaching a Kensington lock to secure the appliance.
GPS Input
The GPS antenna input on the rear panel of a CSG700 series appliance allows you to connect an
external GPS antenna. When you connect a GPS antenna to the appliance, it automatically
identifies the geographical location of the unit, allowing you to detect any theft or movement of
the appliance. Knowing the precise location of the unit also enables Versa Director to provision
devices when the serial number is not mandated for the zero-touch provisioning (ZTP) process.
Network Interface Card Modules
The CSG700 series appliance offers interface modularity, providing four Ethernet ports that
support two types of NICs:
• 1-GB Ethernet over copper (EoC) port
• 1-GB EoC with PoE port
The four Ethernet ports on the NIC module are labeled Port 6 to Port 9.
Figure 1 shows the four RJ-45 connectors for the four Ethernet ports. (1-GB EoC port and for the
1-GB EoC with PoE port.)