Safety Guide

Cloud Services Gateway 700 Series
Ó 2019 Versa Networks, Inc.
20
When placing a CSG700 series appliance on a desk, ensure that the vents on the top of the unit
are never blocked, to allow hot air to flow out of the appliance. Covering the vents prevents heat
from dissipating out of the appliance, which will cause the chassis to overheat and then shut
down.
Install a CSG700 Series Appliance
This article provides instructions about how to unpack a CSG700 series appliance and mount it
in a 19-inch rack.
Unpack a CSG700 Series Appliance
The CSG700 series appliance is packed in a plastic box, and it is shipped in a cardboard carton,
secured with foam packing material. The carton also contains an accessory box. It is
recommended that you unpack the appliance only when you are ready to install it.
To unpack a CSG700 series appliance:
1. Open the top flaps of the cardboard carton.
2. Remove from the box the foam packing material holding the appliance and the
accessories in place. See Figure 1.
3. Remove the accessory box and the appliance from the foam packing material.
4. Remove the accessories from the accessories box.
5. Verify the components against the packing list that is included in the box.