Installation Guide

Installation instructions
1. Pre-drill a hole using a 5/16’’ drill bit.
2. Insert the TripleGrip
TM
into wall or ceiling
3. Tap in with a hammer flush to the wall.
4. Insert the Versahook
TM
into the TripleGrip
TM
5. Screw clockwise until firmly set in place.
When installing into wood, do not use the TripleGrip
TM
1. Pre-drill a hole using a 5/16’’ drill bit.
2. Insert and screw the Versahook
TM
into the wood.
3. Screw until firmly set in place.