Installation Instructions

PEAK

WEB BRACKET 1

WEB BRACE 1

WEB BRACE 2

WEB BRACKET 2

WEB BRACKET 3

LOCATE BRACKET ON

COLLAR TIE.

INSERT ONE SCREW

HERE.

UNDO ASSEMBLY AND

INSTALL BRACE 3.

REINSTALL HARDWARE.

STEP 3: INSTALL WEB BRACES (2):

Loosely attach Web Bracket 2 to the other end of Web Brace 1. Place the Web Bracket on the Collar Tie (make sure the

collar tie is straight and fasten the face of the bracket to the collar tie with a self-drilling screw. Remove the hex nut and

attach one end of Web Brace 2 to the Web Bracket 2 assembly. ( Like the first assembly, one brace end should be on

one side of the web bracket tab and one on the other.) Now, loosely attach Web Bracket 3 to the other end of Web Brace

2 and fasten the bracket to the under side of the rafter. Repeat assembly for remaining Web Brace 2.

STEP 4: ASSEMBLING WEB BRACE 3: WEB BRACE 3 IS 24” LONG ON ALL CARPORTS (part #76-2400).

Measure out 1” from the end of the Collar Tie and make a mark. This will be the location of the upper Web Bracket for

Web Brace 3. Attach the upper Web Bracket with 3 self-drilling screws. Now, fasten Web Brace 3 to the upper Web

Bracket with a hex bolt, lock washer and hex nut. (Do not tighten at this time.)

Loosely attach a Web Bracket to the lower end of Web Brace 3 and place it against the side post. Re-check the building

dimension across the bottom of the frame (20’) before attaching lower bracket to side post. Now, attach the face to the

side post with a screw, remove the hex nut, let the bolt drop down and install the two screws in the side of the Web

Bracket. Now, reinstall the bolt, lock washer and nut. Repeat assembly for remaining Web Brace 3 on the other side of

the frame.

WHEN ALL BRACES ARE IN PLACE, TIGHTEN ALL HARDWARE. The nut size is 9/16”. You may also need to hold the

bolt head with pliers.

WEB BRACE 3

UPPER WEB BRACKET

COLLAR TIE

LOWER WEB BRACKET

INSTALL THIS SCREW FIRST IN FACE

SIDE POST

PAGE 12

20W: PART #76-2400