Installation Instructions

ASSEMBLY INSTRUCTIONS FOR BACK
ENCLOSURE FRAME BE-20 (20΄ WIDE )
STEP 1: BASE RAIL ASSEMBLY
Loosely assemble all Base Rail parts: (3)T-sections A, (2) Base Rail sections B, and (2) Base Rail sections C.
Place the loose assembly on the ground or slab at the back of the building with the pins on the T-Sections in the verti-
cal position. Adjust the joint spacing to be equal. The ends of the Base Rail Assembly should be touching the Side
Base Rails of the building (19‘- 6“). Now, fasten each joint with two Self Drilling Screws on the top side.
B
JOINT DETAIL
PAGE 15
B
A
C
A
C
A
G
G
# 12 X 1” HEX HEAD
SELF-DRILLING SCREW
47”
47”
37”
37”