Installation Instructions

STEP 6: Installation of Door Header Brace (C)
Attach the Door Header Brace (C) to the top center of the Short Header Tube (B) with two Angle Brackets (H) and
#12 x1” self-drilling screws. Level the Door Header Assembly and attach the top of the Door Header Brace to the
building Peak with one Flat Bracket (H) and (6) #12 x 1” self-drilling screws. The Flat Bracket should be mounted
on the inside of the building
B
C
G
G
H
PEAK
PAGE 21
#12 x 1” HEX Head
Self-Drilling Screw
STEP 7: Fasten the two Door Header joints at this time with two #12 x 1” self-drilling screws per joint. Screws
should be on the inside of the building.
VIEW FROM INSIDE OF BUILDING