Installation Instructions

ATTENTION:
IT IS IMPORTANT THAT YOU READ THE FOLLOWING NOTE
BEFORE STARTING THE ASSEMBLY OF YOUR SHELTER
NOTE:
If during the installation process you have
Difficulty fitting frame components together,
use an adjustable wrench to open end of re-
ceiving tube as shown at right.
Close wrench down around bent portion of
tube and bend wall outward.
What you’ll need:
Tape Measure
Hammer
Pencil/Marker
2 Step Ladders
Work Gloves
Level
Shovel or
Post hole digger
Tin Snips
Cordless (14 or 18 volt)
Drill Driver or
Corded Electric Drill
With 5/16" Socket Drive
PAGE 3
Mason Line or
Nylon string
Safety glasses