Instructions / Assembly

PAGE 28

STEP 14: INSTALLING TRIM ON OPTIONAL WINDOW

IF YOU DID NOT PURCHASE A WINDOW, SKIP TO THE NEXT PAGE

Cut a piece of Bottom J-Trim 2” longer than the window width. Center it along the bottom of the window and fasten it at

both ends with Pan Head Self-Drilling Screws. Be careful not to hit the heads of the screws used to mount the window.

Cut two pieces of Side J-Trim to fit from the top of the bottom J-Trim that you just installed to the top of the window. Fas-

ten both pieces of side J-Trim at both ends with Pan Head Screws.

Cut one piece of J-Trim to fit from the outside edge of the front flange on one side J-Trim to the other. The distance will

be about 2” longer than the window frame. Now, clip two 1” long slits in both ends of the Top J-Trim as shown below.

Place the Top J-Trim on top of the Side J-Trim and fold the end tabs that you created down into the Side J-Trim chan-

nels. Fasten the Top J-Trim at both ends with Pan Head Screws.

J-TRIM

NOTE: WINDOW MUST BE

INSTALLED BEFORE

WINDOW TRIM

MAKE TWO CUTS 1” LONG

AND FOLD TAB DOWN INTO

SIDE J-TRIM CHANNEL

(BOTH ENDS OF TOP J-TRIM)

2” LONGER THAN

WINDOW FRAME

2” LONGER THAN

WINDOW FRAME

OR EVEN WITH OUTSIDE

EDGES OF FRONT

FLANGE ON SIDE J-TRIM

OUTSIDE EDGE OF

FRONT FLANGE

ON SIDE J-TRIM

1” SLIT 2 PLACES

1”

#10 PAN HEAD SCREW