Installation guide

W
ake
-
up
Methods
The adapter supports the following wake-up methods:
- Magic packet wake-up
The adapter can accept magic packets from network and walk-
up the computer at standby state or shutdown state.
- Link change wake-up
The adapter can sense link up event and walk-up the computer
from standby state.
- Ping packet
The adapter can accept a ping packet and walk-up the
Windows computer from standby state.
W
ake
-
On
-
LAN
(WOL)
Installation
The adapter features :
1. One LAN controller which can support PCI power manage-
ment interface and function.
2. One 3-Pin Wake on LAN (WOL) connector (JP1) for PCI 2.1
system
3. One Wake on LAN (WOL) cable for PCI 2.1 system
For
PCI
2.1
Systems
(or
earlier
2.0
systems)
The 3-pin WOL connector (JP1) provides an interface to the PCI
2.1 compliant system motherboard for auxiliary power and
Power
Management Enable signal through the WOL cable. One 3-pin
WOL
connector must be also provided on the motherboard. To install
the
cable, refer to section 2.2 for the details.
9