INSTRUCTION MANUAL Model Number: SPP55AW SMART SERIES PORTABLE WASHER BEFORE USE, PLEASE READ AND FOLLOW ALL SAFETY RULES AND OPERATING INSTRUCTIONS.
TABLE OF CONTENTS Appliance Safety 3 Important Safeguides 3 Parts, Features, and Accessories 5 Important Safety Instructions 6 Installation Instructions 7 Before Using Your Portable Washer 7 Selecting a Location 7 Adjusting the Adjustable Foot 8 Installing the Noise Damper Plate 8 Connecting the Water Supply Hoses / Sink Faucet Connection 9 – 10 Disconnecting the Water Supply Hoses / Positioning the Drain Hose 10 Electrical Connection / Extension Cords 11 Control Panel / Functions De
APPLIANCE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the Safety Alert Symbol. This symbol alerts you to potential hazards that can kill or injure you and others. All safety messages will follow the Safety Alert Symbol and either the words “DANGER”, “WARNING” or “CAUTION”.
IMPORTANT SAFEGUIDES Before the appliance is used, it must be properly positioned and installed as described in this manual, so read the manual carefully. To reduce the risk of fire, electrical shock or injury when using the appliance, follow basic precaution, including the following: Plug into a grounded 3-prong outlet, do not remove grounding prong, do not use an adapter, and do not use an extension cord. Replace all panels before operating.
PARTS & FEATURES Models: Capacity: SPP55AW Cubic Feet: 1.
IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when using your portable washer, follow these basic precautions: WARNING Read all instructions before using the portable washer. Do not wash articles that have been previously cleaned in, washed in, soaked in, or spotted with gasoline, dry-cleaning solvents, or other flammable or explosive substances, as they give off vapors that could ignite or explode.
INSTALLATION INSTRUCTIONS BEFORE USING YOUR PORTABLE WASHER SCREWDRIVER Remove the exterior and interior packing. You will need the following tools: Wrench Pliers Screwdriver Check to be sure you have all of the following parts: PLIERS WRENCH 1 Instruction Manual 1 Hot Water Connector Lid 1 Faucet Adapter 2 Rubber Washers 2 Water Inlet Hoses Remove shipping brace.
INSTALLING THE NOISE DAMPER PLATE 8
CONNECTING THE WATER SUPPLY HOSES The water supply hose must be connected to the washing machine at one end and to the water faucet at the other. Do not stretch the water supply hose. If the hose is too short and you do not wish to move the water faucet, replace the hose with a longer, high-pressure hose. Select appropriate faucet as shown in the figures below. If none of these faucets are available, use the faucet adapter provided. The end of faucet spout should be longer than 10mm (0.
SINK FAUCET CONNECTION For normal kitchen-sink tap only use the inlet hose with cold water inlet. Connect the inlet hose to the male hose thread adapter by turning it clockwise to be fixed tightly. Make sure to insert the rubber ring enclosed. Then connect tightly to your sink. Note: Some faucets may require you to also use the female hose thread adapter between the male adapter and your sink faucet as shown below. Make sure the rubber ring is inserted and connect to your sink.
ELECTRICAL CONNECTION Warning Improper use of the grounded plug can result in the risk of electrical shock. If the power cord is damaged, have it replaced by an authorized Versonel Products service center. This appliance should be properly grounded for your safety. The power cord of this appliance is equipped with a threeprong plug which mates with standard three prong wall outlets to minimize the possibility of electrical shock.
CONTROL PANEL 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15.
FUNCTION DESCRIPTIONS 9 10 12 13 13
OPERATING YOUR PORTABLE WASHER PREPARATION 1. Connect the water inlet hose 3. Insert the plug into the to the water faucet. Don’t socket. For safety the plug switch on the power if the should have ground water pressure is lower than connection. 0.05MPa and higher than 0.5MPa. sh load into ose the ction with lid as to be spin 4) Insert the end of the drain hose into the hook shelf, and hang the drain hose over a drain outlet. 0.7m~1.2m inlet hose and Please set the plug into the 2.
BEFORE WASHING Make sure that you follow all manufacturer instructions for washing: 15
OPERATING INSTRUCTIONS PRESS THE POWER BUTTON. PRESS THE WATER LEVEL BUTTON. Choose appropriate water level according to wash load quantity. WATER TEMPERATURE CHOICE. Press the water temperature selection button, you can choose to from cold, warm, and/or hot water. NOTE: The washer will provide a cold rinse in all TEMPERATURE settings. Indicator Light Shown COOL HOT WARM Description This means that you have selected to use COOL or cold water.
RINSE AND SPIN Press down the POWER button. Press the function button until the RINSE & SPIN indicators are ON. Press the water level button to select the appropriate water level setting. Press the START/PAUSE to start the course. And the LED display will show the remaining time of the entire course. Note: At this function, the water temp can’t be chosen, the default water temp is COOL. SPIN ONLY Press down the power button.
Note: The default function is WASH, RINSE and SPIN, if you need the SOAK function, please press the function button to choose the SOAK function. Close the lid, or the washing machine will buzz during wash and spin cycle. In the event the clothing loaded becomes unbalanced, the safety switch will be triggered causing the washing machine to automatically refill with water to adjust the imbalance. Note: Clothes easily discolored should be washed separately so as to prevent inter-dyeing.
CARE AND MAINTENANCE CLEANING YOUR PORTABLE WASHER Clean the surface of your portable washer regularly with soft fabric. Clean the inner tub regularly, especially immediately after starch or bleach operation. Clean the filter in the inlet valve or inlet hose regularly in order to prevent it from clogging. Unplug the power cord. Remove the inlet hose and clean the filter with a brush. Clean the surface of the washing machine with a soft cloth regularly.
PROBLEMS WITH YOUR PORTABLE WASHER? You can solve many common portable washer problems easily, saving you the cost of a possible service call. Try the suggestions below to see if you can solve the problem before calling the servicer. TROUBLESHOOTING GUIDE PROBLEM Washer does not operate. No water or insufficient water supply. The washing machine does not drain. Washing machine vibrates or is too noisy. Washing machine does not spin.
