User's Manual

Hardware and Wiring Installation Guide 27
the back cover of the badge and flip it over to expose the battery.
3. Gently lift the battery from the board using your thumb and finger.
4. Insert the new battery into the lead holes. Replace the top cover and
gently tighten the badge screw.
Personnel
Badge
3V Lithium
CR2477
950 mAH
1. Locate the screw on the back of the badge. Using a small Phillips
head screwdriver (or security screwdriver), remove the screw and
battery cover.
2. Remove the battery and replace with the new battery, making sure
to pay attention to polarity, which is noted on the inside of the
battery compartment cover.
3. Replace the battery compartment cover.