User's Manual

Versus Technology, Inc.

2.3 System Hardware Components

The Versus Information System is made up of a network of badges, Sensors, Collectors, and

Ethernet Concentrators.

2.3.1 Badges

Badges send infrared (IR) or radio frequency (RF) signals to Sensors that usually are installed in

the ceilings of each room. This signal contains encoded digital information that is used to identify

and obtain the status of the badge. Motion, timing, battery state, and auxiliary information are all

included in the signal.

Badges are worn by people or attached to equipment, and Remote Station units are affixed to

walls. Badges can include IR, RF, or both IR and RF technology, depending on the needs of the

facility. Some badges also include a button for alarm notification. Consult the badge specification

sheets for more information on battery and component functions.

2.3.1.1 Infrared (IR) Badges

IR badges use near-visible light to communicate with the IR Sensors, so the signal can be hidden

from the Sensors by clothing or obstacles. This is the same technology used to operate your

television remote. Just as you cannot expect your television remote to change the channel if you

are locked in the next room, you should not expect the IR badge signal to work if the badge is

covered or hidden from view.

IR-only tags can be used for locating people or equipment. These badges are ideal for locating

applications in which location is required, but communication or alert capabilities are not needed.

IR Locator Badge (VER-1770)

The IR Locator Badge sends infrared signals from two emitters located

in the “window” on the front of the badge case. The signals are directed

upward and somewhat forward at a wide angle to be received by the

Sensors. Better performance occurs by keeping the badge in an upright

position.

• Battery Type – 3.0 V lithium coin cell (industry type

CR2477 lithium 950 mAH)

IR Asset Tag (VER-1810)

The IR Asset Tag can be affixed to equipment and other assets. The tag

emits digitized light signals that relay the badge’s unique identification code

to the system and provides location information about the item within a

facility.

• Battery Type – 3.0 V lithium coin cell (industry type CR2477 lithium 950 mAH)