User's Manual

Versus Information System User Guide
Proprietary Information – Do Not Distribute Page 11
VER-6018 /
-1 /-20
CR3032 – 3.0V Lithium Coin Cell Batteries
* use a dash and numbers to indicate 1 single pack or 20 pack
VER-6035-1
3.6V Lithium AA Battery
VER-6092
Sensor Focus Kit
VER-6800
Clearview Badge Opening Tool
4. Versus Hardware Component Overview
For a complete list of available Versus hardware products and their part numbers, refer to Section
3: Versus Hardware Parts List. Also refer to the individual marketing Hardware Specification
Sheets for more information about each component.
A. Signaling Devices and Supplies
Personnel badges are worn by people, asset tags are attached to equipment and Remote
Station are affixed to walls. Badges can incorporate IR, RF or both IR and RF technology
and are selected according to the needs of the facility. Personnel badges and asset tags
emit infrared (IR) and/or radio frequency (RF) signals. The signals contain encoded
digital information that is used to identify the badges and report on location and status.
Motion, timing, battery state and auxiliary information are all included in the badge signal.
1. Personnel Badges
a) IR/RF Clearview Badge (VER-195x)
In addition to sending IR signals, IR/RF
combination badges have the added feature
of sending radio frequency signals that are
received by RF Sensors. RF signals are used
in a supervisory capacity in cases when IR
signals are obstructed from view. RF is also
responsible for sending alarms and call
signals triggered by badge button presses.
The Clearview Badge utilizes both IR and RF technologies. The badge is
equipped with a call/alert button that, when pressed, transmits IR and RF
signals. These signals can be used to notify the system to activate a
customizable, pre-programmed response.
 Battery Type – 3.0 V lithium coin cell (industry type
CR2477 1000 mAH)
 RF Frequency – 433.92 MHz
 IR Wavelength – 875 nanometers, 447.5 KHz