User's Manual

EVX-531 OpErating Manual
15
advancEd opEratIon
prI-2 sEt
Press (or press and hold) the assigned programmable
key to toggle the current channel to the priority chan-
nel 2 “enable” and “disable”.
prI-2 dIsaBlE
Press (or press and hold) the assigned programmable
key to disable the priority channel 2 of the group tem-
porarily.
scan
The Scanning feature is used to monitor multiple
signals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
To activate scanning:

Press (or press and hold) the assigned Program-
mable key to activate scanning.

The scanner will search the channels of each
channel, looking for active ones; it will pause
each time it nds a channel on which someone is
speaking.

Press (or press and hold) the assigned Program-
mable key again to disable scanning. Operation
will revert to the programmed revert channel.
Note: Your dealer may have programmed your radio
to stay on one of the following channels if you press
the
PTT
switch during scanning pause:

“Scan Pause” channel (“Talk Back”)

“Last Busy” channel

“Priority-2” channel

“User Programmed” channel (“Select Channel”)


The channel which dened in the
CH
Selector
knob.
FCC ID: AXI11134620
IC: 10239A-11134620