User's Manual

EVX-531 OpErating Manual
16
group scan
The Scanning feature is used to monitor multiple
channels programmed into the transceiver. While
scanning, the transceiver will check each channel of
the programmed group for the presence of the signal,
and will stop on a channel if a signal is present.
Press (or press and hold) the assigned programmable
key to activate the scanning on the selected groups.
dual WatcH
The Dual Watch feature is similar to the SCAN fea-
ture, except that only two channels are monitored:

The current operating channel; and

The Priority-2 channel.
To activate Dual Watch:

Press (or press and hold) the assigned Program-
mable key.

The scanner will search the two channels; it will
pause each time it nds a channel on which some-
one is speaking.
To stop Dual Watch:

Press (or press and hold) the assigned Program-
mable key.

Operation will revert to the “Dual Watch Revert”
channel.
Fm scan
(
FolloW-mE scan
)
The FM Scan feature checks a User-assigned Priority
Channel regularly as you scan other channels. Thus,
if only Channels 1, 3, and 5 (of the 8 available chan-
nels) are designated for “Scanning”, the user may
nonetheless assign Channel 2 as the “User-assigned”
Priority Channel via the FM Scan.
To activate FM Scan, rst select the channel you want
to designate as the “User-Assigned Priority Channel”
and press (or press and hold) the assigned program-
mable key. Then rotate the
CH
Selector knob to re-
call to the “Scanning Start” channel which has been
programmed by your dealer to activate the scanner.
When the scanner stops on an “Active” channel, the
User-assigned Priority Channel will automatically be
checked every few seconds; if activity is found on the
User-assigned Priority Channel, the radio will switch
between it and the Dealer-Assigned Priority Channel,
if any.
advancEd opEratIon
FCC ID: AXI11134620
IC: 10239A-11134620