User's Manual

EVX-531 OpErating Manual
8
opEratIon
Operation Quick Start

Tu r n t h e t o p p a n e l ’s
VOL/PWR
knob clock-
wise to turn the radio
on.

Turn the top panel’s
CH
Selector knob to choose
the desired operating
channel. The radio an-
no u n c e s t h e channel
number, if the Channel
Announcement Feature is worked.

If you want to select the operating channel from a
different Channel Group, press (or press and hold)
the Programmable key (assigned to the “
group
changE
” function) to change the Channel Group
you want before selecting the operating channel.
Preliminary Steps

Install a charged battery pack onto the transceiver,
as described previously.

Screw the supplied antenna
onto the Antenna jack.
Never attempt to operate
this transceiver without an
antenna connected.

If you have a Speaker/Mi-
crophone, we recommend
that it not be connected un-
til you are familiar with the basic operation of the
EVX-531
.
IMPORTANT NOTE
Water resistance of the transceiver (IP57: 1
meter / 30 minutes) is assured only when the
following conditions:

Battery pack is attached to the transceiver;

Antenna is connected to the antenna jack;

and
MIC/SP
cap is installed in the
MIC/
SP
jack.