User's Manual

EVX-5300 OpErating Manual
14
advanced operatIon
speed dIal
Press (or press and hold) the assigned
PF
key to prepare the “Speed Dial” func-
tion. Press the
PTT
switch within pre-dened period time of releasing the key to
send a pre-dened DTMF tone.
call
Press (or press and hold) the assigned
PF
key to send a 2-tone or 5-tone sequential
tone.
duty
Press (or press and hold) the assigned
PF
key to toggle the Duty function of the
2-tone, 5-tone, MDC1200
®
, or Digital Call decoder “On” and “Off”.
When the Duty function is set to “On”, the user will always hear (depending on
the sub-audio signaling) all trafc on the paging channel. The radio will sound the
paging alert when it receives the programmed 2-tone, 5-tone, MDC1200
®
, or Digi-
tal Call code.
When the Duty function is set to “Off”, the user will NOT hear normal radio traf-
c on the paging channel. The radio will sound the paging alert and unmute only
when it receives the programmed 2-tone, 5-tone, MDC1200
®
, or Digital Call code.
tX save dIsaBle
Press (or press and hold) the assigned
PF
key to disable the Transmit Saver, if you
are operating in a location where high power is almost always needed.
The Transmit Saver reduces the transmit power when a very strong signal from an
apparently nearby station is being received.
locK
Press (or press and hold) the assigned
PF
key to lock the various aspects of the
front panel’s keys. The precise lockout conguration must be programmed by your
Vertex Standard dealer.