User's Manual

EVX-5300/-5400 OpErating Manual
22
adVancEd opEratIon
coDE sEt
(
This function is only available in the
EVX-5400
)
r
Press (or press and hold) the assigned
PF
key to change the 5-Tone encoding
digit.
To change the tones, select the desired digit using the
[
P1
]
/
[
P2
]
keys (or
MH-
75
A8J
’s
[
A
]
/
[
B
]
keys), then change the number using the
[

]
/
[

]
keys.
r
Press the
[
P4
]
key (or
MH-75
A8J
’s
[
D
]
key) to store the new setting. The dis-
play indicates “
- SET -
” briey, then reverts to the normal channel indication.
You may cancel the new setting by pressing the
[
P3
]
key (or
MH-75
A8J
’s
[
C
]
key). In this case, the display indicates “
- CANCEL -
” briey.
You may enter the 5-Tone encoding code directly from the microphone’s numeric
key (
[
0
] - [
9
]
) and
[

]
key (wild card), if the optional
MH-75
A8J
microphone is
used.
spEED Dial
(
This function is only available in the
EVX-5400
)
Your Vertex Standard dealer may have pre-programmed Auto-Dial telephone num-
ber memories into your radio.
To dial a number:
r
If the optional
MH-75
A8J
microphone is used, press (or press and hold) the
assigned
PF
key, then press the microphone’s numeric key (
[
0
] - [
9
]
) corre-
sponding to the Auto-Dial memory number which is provided by your Vertex
Standard Dealer, then press the
PTT
switch. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
r
If the normal (without keypad) microphone is used, press the
[

]
/
[

]
keys to
select the Auto-Dial memory number which is pre-programmed by your Vertex
Standard dealer, then press the
PTT
switch. The DTMF tones sent during the
dialing sequence will be heard in the speaker.
DtMF coDE sEt
(
This function is only available in the
EVX-5400
and requires the Optional
MH-75
A8J
16-Keypad Microphone
)
Press (or press and hold) the assigned
PF
key to start storing the DTMF dialing
sequence. After entering to enter all DTMF digits from the
MH-75
A8J
’s keypad,
you can transmit the code by pressing the
PTT
switch.