User's Manual

EVX-5300/-5400 OpErating Manual
26
arts
tm
(
auto rangE transpond systEm
)
This system is designed to inform you when you and another ARTS
TM
-equipped
station are within communication range.
During ARTS
TM
operation, when the radio receives an incoming ARTS
TM
signal,
a short beep will sound, and “
IN SERV
” (“In Service”) will be indicated on the
display for 2 seconds

. If you move out of range for more than two minutes, your
radio senses that no signal has been received; a short triple-beep will sound, and
“
OUT SERV
” (“Out of Service”) will be displayed on the display for 2 seconds

. If
you subsequently move back into communication range, as soon as the other sta-
tion transmits, a short beep will sound and “
IN SERV
” will be indicated again on
the display for 2 seconds

.

:
EVX-5400
only.
arts
ii
™
(
auto rangE transpond systEm
)
The ARTSII
TM
system is enhanced feature of the ARTSII
TM
which can be nding
out the communication range of the radio individually by using the MDC-1200
®
Encode/Decoder.
Note:
EVX-5300
will be able to be decoded by display radios with ARTSII
TM
en-
abled, but will not be able to decode the other radios encode signals.