User's Manual

EVX-5300/-5400 OpErating Manual 1
The
EVX-5300/-5400
series are full-featured Digital/Analog transceiver designed
for exible mobile and base station business communications in the VHF/UHF
Land Mobile bands. This transceiver designed for reliable business communica-
tions in a wide variety of applications with a wide range of operating capability
provided by their leading-edge design.
The
EVX-5300/-5400
operates using the TDMA protocol for spectrum and power
efciency and lower total equipment cost compared to FDMA. Digital eliminates
noise and static from voice transmit to only deliver the intended voice message
crisply and clearly. The
EVX-5300/-5400
feature the AMBE+2™ vocoder for en-
hanced voice quality.
This transceiver allows up to 8 memory channels. Important channel frequency
data is stored in the ash memory on the CPU, and is easily programmable by a
Vertex Standard licensed dealers using a personal computer with Vertex Standard
Programming equipment
FIF-12
USB Programming Interface and
CT-104A
Con-
nection Cable for
FIF-12
and
CE142
Software. Or, once programmed, cloning
cable
CT-4
can be used to program portable to portable directly.
The pages which follow will detail the many advanced features provided in the
EVX-5300/-5400
series transceiver. After reading this manual, you may wish to
consult with your Network Administrator regarding precise details of the congu-
ration of this equipment for use in your application.
For North American Users Regarding 406 MHz Guard Band
The U.S. Coast Guard and National Oceanographic and Atmospheric
Administration have requested the cooperation of the U.S. Federal
Communications Commission in preserving the integrity of the protected
frequency range 406.0 to 406.1 MHz, which is reserved for use by
distress beacons. Do not attempt to program this apparatus, under any
circumstances, for operation in the frequency range 406.0 - 406.1 MHz if
the apparatus is to be used in or near North America.
IntroductIon
EVX-5300 EVX-5400