User's Manual

VX-264 Operating Manual
23
adVanced oPeration
scan set
Press,(orpressandhold),theassigned
PF
keytoadd/de-
letethecurrentchannelto/fromyourscanninglist.
Tostoreaparticularchanneltoyourscanninglist,press,(or
pressandhold),theassigned
PF
key.Ifyoudeleteachan-
nelfromyourscanninglist,press,(orpressandhold),the
assigned
PF
keyagain.
Whenthescannerispaused,youmayremovethechannel
from thescan listtemporarily by pressing,(or press and
holding),thesamekey.
Note 1:whenstoreaparticularchanneltoyourscanning
list,thedisplayindicates“”brieyand“ ”icon
willappearonthedisplay.
Note 2:whendeleteachannelfromyourscanninglist,the
display indicates “ ” briey and the “ ” icon
willdisappearfromthedisplay.
grouP scan set
YoumaywishtohavetheScannerpassthroughmorethan
one Group during the scanning process (normally, scan-
ningisperformedwithinthecurrentgrouponly).
ToincludethecurrentGroupinthescanningloop,press,
(orpressandhold),theassigned
PF
key.Toremoveacur-
rentGroup fromGroup Scan,press, (orpress andhold),
theassigned
PF
keyagain.
ta
(
talK around
)
scan
Press,(orpressandhold),theassigned
PF
keytotoggle
theTAScanfeature“On”and“Off”.
WhileTAScanisproceeding,thetransceiver willsearch
boththetransmitandreceivefrequencies.Whenasignal
is encountered on the receive frequency, the transceiver
will pause until the signal disappears. When a signal is
encountered on the transmit frequency,the transceiver
willcheckforactivityonthereceivefrequencyeveryfew
seconds (interval programmed by your Vertex Standard
dealer).
WhentheTAScanfeatureisactivated,the“ ”iconwill
beblinkedonthedisplay.
Note:TheTAScanfeaturedoesnotactivateontheSim-
plexChannel.
FCC ID: AXI11274620
IC: 10239A-11274620
Vertex Standard LMR, Inc.