User's Manual

18
VX-261 Operating Manual
adVanced oPeration
sPeed dial
Your Vertex Standard dealer may have pre-programmed
Auto-Dialtelephonenumbermemoriesintoyourradio.
Todialanumber:
Press,(orpressandhold),theassigned
PF
keytosenda
pre-denedDTMFtone.TheDTMFtonessentduringthe
dialingsequencewillbeheardinthespeaker.
call
Press,(orpressandhold),theassigned
PF
keytosenda
pre-programmed2-Toneencodecode.
dutY
Press,(orpressandhold),theassigned
PF
keytotoggle
theDutyfunctionofthe2-Toneor5-Tone“On”and“Off”.
When theDuty functionis setto“On”, theuser willal-
wayshear(dependingonthesub-audiosignaling)alltraf-
conthepagingchannel.Theradiowillsoundthepaging
alertwhenitreceivestheprogrammed2-Toneor5-Tone.
WhentheDutyfunctionissetto“Off”,theuserwillNOT
hearnormalradiotrafconthepagingchannel.Theradio
will soundthe pagingalert and unmuteonly whenit re-
ceivestheprogrammed2-Toneor5-Tone.
tx saVe disable
The Transmit Battery Saver helps extend battery life by
reducingtransmit powerwhen avery strongsignal from
an apparently nearby station is being received. Caution
is advised when using this feature, as your transmission
powercoulddegradetheaudioheardbythereceivingra-
diosinyourcommunicationpath.
Press,(orpressandhold),theassigned
PF
keytodisable
theTransmitBatterySaver,ifyouareoperatinginaloca-
tionwherehighpowerisalmostalwaysneeded.
Press again, (or press and hold again), the assigned
PF

key, theTransmit Battery Saver activates to reduce the
transmitpowerwhenaverystrongsignalfromanappar-
entlynearbystationisbeingreceived.
locK
Press(orpressandhold)theassigned
PF
keytolockthe
CH
Selectorknob,Programmablekeys,and
PTT
switch.
FCC ID: AXI11284620
IC: 10239A-11284620
Vertex Standard LMR, Inc.