User's Manual

6
VX-261 Operating Manual
beFore You begin
r
 Toremove thebattery, turnthe radiooffand remove
anyprotectivecases.SlidetheBatteryPackLatchon
the bottom of the radio toward the front panel while
slidingthebatterydownabout1/2inch(1.5cm).Then
liftthebatteryoutfromtheradio.




r
 Toinstallthebatterypack,alignthebatterypacktothe
radiowithanoffsetabout1/2inch(1.5cm)fromthe
topedgeofbatterycompartment,thenslidethebattery
packupwarduntilitlocksinplacewitha“Click.”

r
 RemovetheSpacerPlatefromthenestoftheoptional
CD-58
 Desktop Charger, if theBattery Spacer is in-
stalled.
r
 Insert the DC plug from the optional
PA-55
AC
AdapterintotheDCjackontherearpaneloftheop-
tional
CD-58
 DesktopCharger, andthen connectthe
PA-55
ACAdaptertotheAClineoutlet.
r
 Insertthebatterypackintothe
CD-58
DesktopChar-
gerwhilealigningtheslotsofthebatterypackwiththe
guides inthe nest ofthe
CD-58
; referto the follow-
ingillustrationfordetailsonproperpositioningofthe
PA-55
CD-58
SpacerPlate
ACLineOutlet
FCC ID: AXI11284620
IC: 10239A-11284620
Vertex Standard LMR, Inc.