Operating Manual

8 EVX-261 OPERATING MANUAL
Belt Clip Installation and Removal
BEFORE YOU BEGIN

To install the Belt Clip: align the
Belt Clip to the groove of the Bat-
tery pack, then press the Belt Clip
downward until it locks in place
with a “Click.”

To remove the Belt Clip: use a
À at head screw driver to press the
Belt Clip Tab away from the bat-
tery pack to unlock the Belt Clip,
then slide the Belt Clip upward to
remove it.
MIC/SP CAP Installation

Use only the supplied screws
when install the
MIC/SP
cap.

This radio does not keep the
Water Resistant Rating (IP55)
when the
MIC/SP
cap is not in-
stalled in the
MIC/SP
jack.
Install the
MIC/SP
cap with the sup-
plied screws.
Belt Clip Tab
Exhibit 8: Operating Manual FCC ID: AXI11374620
IC: 10239A-11374620
Vertex Standard LMR, Inc.