User's Manual

24 EVX-S24 OPERATING MANUAL
GROUP SCAN SET
You may wish to have the Scanner pass through more than
one Group during the scanning process (normally, scan-
ning is performed within the current group only).
To include the current Group in the scanning loop, press
the assigned
PF
key: a small dot (“
”) will appear at the
bottom of the display.
To remove a current Group from Group Scan, press the
assigned
PF
key again, a small dot (“
”) will disappear
from the display.
TA
(
TALK AROUND
)
S
CAN
Toggle the TA Scan feature “On” and “Off”.
When operating on a duplex channel system (for example,
a repeater station), TA Scan allows the transceiver to
search both transmit and receive frequencies on your du-
plex system.
When a signal is encountered on the receive frequency,
the transceiver will pause until the signal disappears.
When a signal is encountered on the transmit frequency,
the transceiver will check for activity on the receive fre-
quency every few seconds (interval programmed by your
Vertex Standard dealer).
When the TA Scan feature is activated, the “
” icon will
blink on the display.
Note: The TA Scan feature does not activate on a Simplex
Channel.
TALK AROUND
Talk Around is most commonly utilized when operating
on duplex channel systems (separate receive and transmit
frequencies, common with use of a repeater station). The
Talk Around feature allows you to bypass the repeater
station and talk directly to a nearby station or transceiver.
This feature has no effect when you are operating on
“simplex” channels, where the receive and transmit fre-
quencies are already the same.
When the Talk Around feature is activated, the “
” icon
will be indicated on the display.
Note that your dealer may have mode provision for “Talk
Around” channels by programming “repeater” and “Talk
Around” frequencies on two adjacent channels. If so, the
key may be used for one of the other Pre-Programmed
Functions.
ADVANCED OPERATION
Exhibit 8: Operating Manual
FCC ID: AXI11464620
IC: 10239A-11464620
Vertex Standard LMR, Inc.