User's Manual

26 EVX-S24 OPERATING MANUAL
wish to contact, then press the
[
MODE
( )]
key.

Press the
[

]
/
[

]
keys to select “CALL ALT”.

Press the
[
MODE
( )]
key to transmit the Call Alert
command to the designated radio. If the designated
radio is active, the designated radio transmits the ACK
command and displays your ID number on the display.
Sel Call
You may call the selected Contact Alias.

Press the assigned
PF
key to activate the MDC1200
Call feature.

Press the
[

]
/
[

]
keys to recall the Contact Alias you
wish to contact, then press the
[
MODE
(
)]
key.

Press the
[

]
/
[

]
keys to select “SEL CALL”.

Press the
[
MODE
( )]
key to transmit the Selective
Call command to the designated radio. If the desig-
nated radio is active, the designated radio transmits the
ACK command and displays your ID number on the
display.
Radio Check
You may check the radio status of the selected Contact
Alias.

Press the assigned
PF
key to activate the MDC1200
Call feature.

Press the
[

]
/
[

]
keys to recall the Contact Alias you
wish to contact, then press the
[
MODE
(
)]
key.

Press the
[

]
/
[

]
keys to select “RADIO CK”.

Press the
[
MODE
(
)]
key to transmit the Radio Sta-
tus command to the designated radio (the display will
indicate “-CAL IN-”). If the designated radio is “alive”,
or in range and powered on, the designated radio trans-
mits the ACK command, and then your radio’s display
indicates “ACK RECV”. If not, your radio’s display
indicates “-NO ACK-”.
Revive
You may revive the stunned radio by following the listed
steps.

Press the assigned
PF
key to activate the MDC1200
Call feature.

Press the
[

]
/
[

]
keys to recall the Contact Alias you
wish to revive, then press the
[
MODE
(
)]
key.

Press the
[

]
/
[

]
keys to select “REVIVE”.

Press the
[
MODE
( )]
key to transmit the revive
command to the stunned radio (the display will indi-
cate “-CAL IN-”). When the stunned radio receives
the revive command, the stunned radio revives, and
then transmits the ACK command automatically. Your
radio’s display indicates “ACK RECV”. If your ra-
dio’s display indicates “-NO ACK-”, the revive com-
mand did not succeed.
ADVANCED OPERATION
Exhibit 8: Operating Manual
FCC ID: AXI11464620
IC: 10239A-11464620
Vertex Standard LMR, Inc.