User's Manual

28 EVX-S24 OPERATING MANUAL
Radio Check
You may check the radio status of the selected Contact
Alias.

Press the assigned
PF
key to activate the Call feature.

Press the
[

]
/
[

]
keys to recall the Contact Alias you
wish to check, then press the
[
MODE
(
)]
key.

Press the
[

]
/
[

]
keys to select “RADIO CK”.

Press the
[
MODE
( )]
key to transmit the Radio Sta-
tus command to the designated radio. If the designated
radio is alive, the designated radio transmits the ACK
command, and then your radio’s display indicates
“ACK RECV”. If not, your radio’s display indicates
“-NO ACK-”.
Revive
You may revive the stunned radio by following the listed
steps.

Press the assigned
PF
key to activate the Call feature.

Press the
[

]
/
[

]
keys to recall the Contact Alias you
wish to revive, then press the
[
MODE
(
)]
key.

Press the
[

]
/
[

]
keys to select “REVIVE”.

Press the
[
MODE
( )]
key to transmit the revive
command to the disabled radio. When the stunned ra-
dio receives the revive command, the stunned radio re-
vives, and then transmits the ACK command automati-
cally. Your radio’s display indicates “ACK RECV”. If
your radio’s display indicates “-NO ACK-”, the revive
command did not succeed.
Stun
You may stun a selected radio in your fl eet (temporarily
disable from transmitting/receiving) forcibly by remote
control.

Press the assigned
PF
key to activate the Call feature.

Press the
[

]
/
[

]
keys to recall the Contact Alias you
wish to stun, then press the
[
MODE
(
)]
key.

Press the
[

]
/
[

]
keys to select “STUN”.

Press the
[
MODE
( )]
key to transmit the stun com-
mand to the designated radio. If the designated radio
is alive, the designated radio transmits the ACK com-
mand and stuns it. If not, your radio’s display indicates
“-NO ACK-”, the disabling command did not succeed.
The stunned radio will revive by the “Revive” function
described previously.
STATUS UP/DOWN
Select a 5-Tone status code from the pre-defined status
list.
STATUS CHECK
Check the 5-Tone receive status code. When you press the
assigned
PF
key, the display will indicate the “Message”
corresponding to the receive status condition per the pre-
defi ned status list.
ADVANCED OPERATION
Exhibit 8: Operating Manual
FCC ID: AXI11464620
IC: 10239A-11464620
Vertex Standard LMR, Inc.