User's Manual

EVX-S24 OPERATING MANUAL 31
USER SET
(
MENU
)
M
ODE
The “User Set” (Menu) Mode allows the user to defi ne or
confi gure various settings, such as Squelch, Key lockout
confi guration, etc. The basic operation method of the “User
Set” (Menu) Mode is as follows:

Press the
[
MODE
(
)]
key to enter the “User Set”
(Menu) Mode.

Select the Set Mode item you wish to change using the
[

]
/
[

]
keys, then press the
[
MODE
(
)]
key.

Adjust the setting of the selected item using the
[

]
/
[

]
keys.

You may revert to the previous step by pressing the
[
SIDE
]
key.

Press the
[
MODE
( )]
key to save the new setting
and exits to normal operation.
You may exit to normal operation without saving the
new setting by press and holding the
[
MODE
( )]
key.
The possible setting features are listed at the right box,
and their operations are explained from next page. In this
chapter, the following icons are used to indicate item (or
feature) supported in either the “Analog” mode or “Digital”
mode:
: Indicates an “Analog” mode only feature.
: Indicates a “Digital” mode only feature.
For item (or feature) that are available in both “Analog”
and “Digital” modes, no icon is shown.
LIST
Digital Contact List
5-Tone Code Select
2-Tone Code Select
DTMF Code Select
MDC1200 ID Select
Group
Scan
Utility
Monitor
SQL OFF
Power
Minimum Volume Level
Beep
Beep Level
SQL Level
Lighting
Privacy/Encryption
Privacy Select
Lone Worker
Bell
PRI-2
TA
Scan Set/Skip
Group Scan Set/Skip
Duty
TX Save Disable
Lock Key
Lock PTT
DIAL
Message
History
LOCK
There is function which
is not called depend-
ing on the state of the
operating channel when
entering the User Set
(Menu) Mode.
For example, if you are
operating in a “Digital”
channel, the SQL SET
function has not been
recalled.
Exhibit 8: Operating Manual
FCC ID: AXI11464620
IC: 10239A-11464620
Vertex Standard LMR, Inc.