Operation Manual

EVX-530 SEriES OpErating Manual
16
operatIon
operating channels are selected by the Program-
mable key and the Channel Group is selected by
the
CH
Selector knob. For further details, contact
your Vertex Standard dealer.
r
Rotate the
VOL/PWR
knob to set the volume
le vel . If no sig nal i s
present on the analog
channel, press (or press
and hold) the Program-
mable key (assigned to
the “
sql off
” func-
tion; background noise
will now be heard, and
you may use this to set
the
VOL/PWR
knob for
the desired audio level. Press (or press and hold)
the Programmable key again to quiet the noise
and resume normal (quiet) monitoring.
The Channel Announcement Feature
works as described below
(
1
)
In the
EVX-534/-539
radio:
The maximum number of channels is 512 (32
channels maximum per group). The radio an-
nounces the channel number digit by digit.
For example, “Channel 1” is announced as
“one” and “Channel 10” is announced as “one
zero”.
(
2
)
In the
EVX-531
radio:
The maximum number of channels is 32 (16
channels maximum per group). The radio an-
nounces Channels 1 - 9 by digit, while Chan-
nels 10 - 16 are announced by number.
For example, “Channel 10” is announced as
“ten” and so on.
r
To transmit, monitor the
channel and make sure it
is clear.
Press and hold the
PTT
switch. Speak into the
microphone area of the
front panel grille in a normal voice level. To re-
turn to the Receive mode, release the
PTT
switch.