Operation Manual

EVX-530 SEriES OpErating Manual
27
adVanced operatIon
speed ch up/doWn
(
eVx-534 & eVx-539
)
Press and hold the assigned
PF
key to cause the radio
to begin stepping (repeatedly) upward or downward
through the channels.
prI-1
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to re-
call the pre-programmed Priority Channel (Priority-1)
by your Vertex Standard dealer directly. The “
P1
”
will appear at the upper right corner on the display.
prI-2
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
recall the pre-programmed Priority Channel of the
current group (Priority-2) by your Vertex Standard
dealer directly. When PRI-2 channel is recalled, the
“
P
” icon will appear on the display.
prI-2 set
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
toggle the current channel to the priority channel 2
“enable” and “disable”. When PRI-2 channel is re-
called, the “
P
” icon will be indicated on the display.
prI-2 dIsaBle
(
eVx-534 & eVx-539
)
Press (or press and hold) the assigned
PF
key, the
display indicates “PRI2 DI” briey, and disable the
priority channel 2 of the group temporarily.
Press again, (or press and hold again), the assigned
PF
key, the display indicates “PRI2 EN” briey, and
enabling the priority channel 2 of the group.
dIrect ch 1 to ch 4
(
eVx-534 & eVx-539
)
Press, (or press and hold), the assigned
PF
key to
recall the pre-programmed channel by your Vertex
Standard dealer directly.
dIrect ch entry
(
eVx-534 & eVx-539
)
You can call the desired channel directly using this
function:
r
Press, (or press and hold), the assigned
PF
key.
A tone will sound, and the current group/channel
will appear on the display.
r
In the
EVX-534
, select the desired digit of the
group number and channel number using the
[
A
]
/
[
B
]
keys, then change the number using the
SIDE-1/SIDE-2
buttons.
In the
EVX-539
, enter the desired group number