Operation Manual

EVX-530 SEriES OpErating Manual
30
scan set
Press, (or press and hold), the assigned
PF
key to add/
delete the current channel to/from your scanning list.
To store a particular channel to your scanning list,
press, (or press and hold), the assigned
PF
key. If you
delete a channel from your scanning list, press, (or
press and hold), the assigned
PF
key again.
When the scanner is paused, you may remove the
channel from the scan list temporarily by pressing, (or
press and holding), the same key.
In the
EVX-534/-539
, 1) when store a particular
channel to your scanning list, the display indicates
“SCN SET” briey and “ ” icon will appear on the
display. 2) when delete a channel from your scanning
list, the display indicates “SCN SKIP” briey and the
“ ” icon will disappear from the display.
group scan set
You may wish to have the Scanner pass through more
than one Group during the scanning process (normally,
scanning is performed within the current group only).
To include the current Group in the scanning loop,
press, (or press and hold), the assigned
PF
key. To
remove a current Group from Group Scan, press, (or
press and hold), the assigned
PF
key again.
In the
EVX-534/-539
, 1) when include the current
group in the scan loop, the “

” icon will appear on the
display. 2) when remove a current group from group
scan, the “

” icon will disappear from the display.
ta scan
Press, (or press and hold), the assigned
PF
key to
toggle the TA (Talk Around) scan feature “On” and
“Off”.
While TA scan is proceeding, the transceiver will
search both the transmit and receive frequencies (the
“ ” icon will blink on the display). When a signal is
encountered on the receive frequency, the transceiver
will pause until the signal disappears (the “ ” icon
will appear but not blink on the display). When a
signal is encountered on the transmit frequency, the
transceiver will check for activity on the receive fre-
quency every few seconds (interval programmed by
your Vertex Standard dealer).
Note: The TA Scan feature does not activate on the
Simplex Channel.
adVanced operatIon