Operation Manual

EVX-530 SEriES OpErating Manual
39
adVanced operatIon
at the upper right corner of the display. You may
find the “ALL DEL” menu which is located at
the last message loop. Describes this menu later.

Press the
SIDE-1
button at once (or press the
SIDE-2
button twice) to conrm the “Call ID” of
the selected message, if desired.

Press the
[
A
]
/
[
B
]
keys to select other received
message, or press the
[
C
]
key to return to the top
of the “IN BOX” function.
Delete (Individual message)

Press the
[
A
]
/
[
B
]
keys to select the received mes-
sage you wish to delete.

Press the
SIDE-2
button at once (or press the
SIDE-1
button twice) to select the “DELETE”
menu, then press the
[
D
]
key. The display indi-
cates “DEL Y/N”(“Y” is blinking).

Press the
[
D
]
key again to delete the selected
message. You may cancel the deleting the mes-
sage by pressing the
[
C
]
key.

Press the
[
A
]
/
[
B
]
keys to select other received
message you wish to delete, or press the
[
C
]
key
to return to the top of the “IN BOX” function.
Delete (All messages)

Press the
[
A
]
/
[
B
]
keys to select the “ALL DEL”
menu which is located at the last message loop,
then press the
[
D
]
key. The display indicates “DEL
Y/N”(“Y” is blinking).

Press the
[
D
]
key again to delete the all messages.
You may cancel the deleting the all messages by
pressing the
[
C
]
key.
WRITE: If your transceiver is
EVX-539
, you may
create a sending message and send/save it in this
function. The
EVX-539
can memorize up to 24 mes-
sages include pre-programmed message which deter-
mined by the CE142 Programming Software.
Create the message

Create the message using the
[
0
]
-
[
9
]
key (for se-
lect the character) and
[
A
]
/
[
B
]
key (for select the
digit). The
EVX-539
can create up to 32 charac-
ters.
You may delete the current character by press-
ing the
[
Ý
]
key, or insert the space character by
pressing the
[
#
]
key.

Press the
[
D
]
key, then press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-2
buttons) to select the “SEND”