Operation Manual

EVX-530 SEriES OpErating Manual
40
adVanced operatIon
or “SAVE” menu depending on your purpose,
and move to each step as follow.
Send the message

Press the
[
D
]
key, then press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-2
buttons) to select the “Call ID”
you wish to send a message.
You may enter a new “Call ID” manually by fol-
lowing operation:

Press the
SIDE-1
/
SIDE-2
buttons to select the
“MANUAL” menu which is located at the last
“Call ID” loop.

Press the
[
D
]
key, then enter the “Call ID” using
the
[
0
]
-
[
9
]
key.

Press the
[
D
]
key again to send the message. The
display indicates “TEXT MSG” and “Call ID”
alternately while sending the message.
Save the message

Press the
[
D
]
key to save the created message.
SEL MSG: You may send/edit/delete the message in
this function.
Send the message

Press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-2
but-
tons) to select the message you wish to send.

Press the
[
D
]
key, then press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-2
buttons) to select the “SEND”
menu.

Press the
[
D
]
key again, then press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-2
buttons) to select the
“Call ID” you wish to send a message.
You may enter a new “Call ID” manually by fol-
lowing operation:
l
Press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-
2
buttons) to select the “MANUAL” menu
which is located at the last “Call ID” loop.
l
Press the
[
D
]
key, then enter the “Call ID” us-
ing the
[
0
]
-
[
9
]
key.

Press the
[
D
]
key again to send the message. The
display indicates “TEXT MSG” and “Call ID”
alternately while sending the message.
Edit the message
Important Note: You can not edit the message which
determined by the CE142 Programming Software.

Press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-2
but-
tons) to select message you wish to edit.

Press the
[
D
]
key, then press the
[
A
]
/
[
B
]
keys (or
SIDE-1
/
SIDE-2
buttons) to select the “EDIT”
menu.