Operation Manual

EVX-5300/-5400 OpErating Manual
19
Ext acc 2
Press, (or press and hold), the assigned
PF
key to toggle the output port “2” of the
D-Sub 15-pin Accessory Connector “On” and “Off”.
EmErgEncy
The
EVX-5300/-5400
series include an “Emergency” feature in either analog or
digital modes, which may be useful for alerting another party assistance may be re-
quired, when monitoring the same frequency as the pre-dened emergency channel.
Press and hold the assigned
PF
key for pre-programmed period to initiate an
emergency call on the pre-dened channel. For further details contact your Vertex
Standard dealer.
To revive the radio from the Emergency mode, just press and hold again the as-
signed
PF
key or turn off the radio.
In the
EVX-5300
, when the Emergency feature is activated, the Transceiver Status
Indicator (“
A
”, “
B
” or “
C
”) will illuminate if the “Emergency” status is assigned
to one of the Transceiver Status Indicators.
In the
EVX-5400
, when the Emergency feature is activated, the “- EMG -” indi-
cation will be indicated on the display.
lonE WorKEr
Press, (or press and hold), the assigned
PF
key to activate the Lone Worker fea-
ture. The Lone Worker feature is designed to emit an alarm for 30 seconds when
the Lone Worker Timer (programmed by your Vertex Standard dealer) has expired.
Press again, (or press and hold again), the assigned
PF
key, the Lone Worker fea-
ture is disabled. If the user does not reset the timer by pressing the
PTT
switch, the
radio switches to Emergency mode.
In the
EVX-5400
, 1) when the Lone Worker feature is activated, the “ ” icon will
be indicated on the display, and 2) when the Lone Worker feature is “on” and “off”,
the display indicates briey “L-WK ON” and “L-WK OFF”.
group up/doWn
(
These functions are only available in the EVX-5400
)
Press, (or press and hold), the assigned
PF
key to select a different group of chan-
nels. A group name will appear briey on the display.
cH up/doWn
Press, (or press and hold), the assigned
PF
key (generally the
[

]
/
[

]
key) to
select a different channel. In the
EVX-5400
, a channel name will appear briey on
the display.
adVancEd opEratIon