Operation Manual

EVX-5300/-5400 OpErating Manual
20
adVancEd opEratIon
spEEd cH up/doWn
(
These functions are only available in the EVX-5400
)
Press and hold the assigned
PF
key causes the radio to begin stepping (repeatedly)
upward or downward through the channels.
prI-1
(
This function is only available in the EVX-5400
)
Press, (or press and hold), the assigned
PF
key to recall the pre-programmed Pri-
ority Channel (Priority-1) by your Vertex Standard dealer directly. When PRI-1
channel is recalled, the “
P1
” will appear at the upper right corner on the display.
prI-2
Press, (or press and hold), the assigned
PF
key to recall the pre-programmed Priori-
ty Channel of the current group (Priority-2) by your Vertex Standard dealer directly.
In the
EVX-5400
, when the priority channel 2 is recalled, the “
P
” icon will be in-
dicated on the display.
prI-2 sEt
Press, (or press and hold), the assigned
PF
key to toggle the current channel to the
priority channel 2 “enable” and “disable”.
In the
EVX-5400
, when the PRI-2 channel is recalled, the “
P
” icon will be indi-
cated on the display.
prI-2 dIsaBlE
Press, (or press and hold), the assigned
PF
key to disable the priority channel 2 of
the group temporarily.
Press again, (or press and hold again), the assigned
PF
key to enable the priority
channel 2 of the group.
In the
EVX-5400
, when the priority channel 2 is “disabled” and “enabled”, the
display indicates briey “PRI2 DI” and “PRI2 EN”.
dIrEct cH 1 to dIrEct cH 4
Press, (or press and hold), the assigned
PF
key to recall the pre-programmed chan-
nel by your Vertex Standard dealer directly.
dIrEct cH Entry
(
This function is only available in the EVX-5400, and requires the Optional
MH-75
A8J
16-Keypad Microphone
)
You can call the desired channel directly using this function:
r
Press, (or press and hold), the assigned
PF
key. A tone will sound, and the cur-
rent group/channel will appear on the display.
r
Enter the desired group number (two digits) and channel number (three digits)