Operation Manual

EVX-5300/-5400 OpErating Manual
21
from the microphone’s numeric
([
0
]
-
[
9
])
key.
r
Press the microphone’s
[
D
]
key to call the designated channel.
You may cancel this function by pressing the microphone’s
[
C
]
key. In this
case, the display indicates “- CANCEL -” briey.
Note: You may recall and cancel the setting by the
[
P3
]
(cancel) and
[
P4
]
(recall) key.
scan
The Scanning feature is used to monitor multiple channels programmed into the
transceiver. While scanning, the transceiver will check each channel for the pres-
ence of a signal and will stop on a channel if a signal is present.
EVX-5300/-5400
series can scan both digital and analog frequency programmed channels simultane-
ously.
To activate scanning:
r
Press, (or press and hold), the assigned
PF
key to activate scanning.
r
The scanner will search the channels in the scan list, looking for a transmitting
channel. The Scan function will pause each time it nds a channel on which
someone is speaking.
r

Press, (or press and hold), the assigned
PF
key again to disable scanning, and
receive the channel which was chosen when pressed the
PF
key.
Note: Your Vertex Standard dealer may have programmed your radio to stay
on one of the following channels if you press the
PTT
switch during the scan-
ning pause:
o
“Scan Pause” channel (“Talk Back”)
o
“Last Busy” channel
o
“Priority-1” channel
o
“Priority-2” channel (
EVX-5400
only)
o
“User Programmed” channel (“Select Channel”)
o
“Scan Start” channel
group scan
(
This function is only available in the EVX-5400
)
The Scanning feature is used to monitor multiple channels programmed into the
transceiver. While Group Scanning, the radio will check each channel of the pro-
grammed group for the presence of the signal, and will stop on a channel if a sig-
nal is present.
Press, (or press and hold), the assigned
PF
key, the display indicates “GRP
SCAN” briey, and activate the scanning on the selected groups.
Press again, (or press and hold again), the assigned
PF
key to disable the group
scan mode, and receive the channel which was chosen when pressed the
PF
key.
adVancEd opEratIon