Operation Manual

EVX-5300/-5400 OpErating Manual
24
In the
EVX-5400
, when the Talk Around feature is activated, the “ ” icon will be
indicated on the display.
Note that your Vertex Standard dealer may have made provision for “Talk Around”
channels by programming “repeater” and “Talk Around” frequencies on two ad-
jacent channels. If so, the key may be used for one of the other Pre-Programmed
Functions.
Note: The Talk Around feature does not activate on a Simplex Channel.
rEsEt
Press, (or press and hold), the assigned
PF
key to reset the RFC (Ready for Com-
munication) condition.
call 1 to call 5
Press, (or press and hold), the assigned
PF
key to send a pre-programmed call sig-
nal of the 2-Tone, 5-Tone, MDC1200
®
or Digital Call.
codE up/doWn
(
These functions are only available in the EVX-5400
)
Press, (or press and hold), the assigned
PF
key to select a 2-Tone or 5-Tone en-
code code from the pre-programmed encode list.
codE sEt
(
This function is only available in the EVX-5400
)
You can change the desired digit of the 5-Tone encode code using this function:
r
Press, (or press and hold), the assigned
PF
key.
r
Select the desired digit by the
[
P1
]
/
[
P2
]
keys, then change the number by the
[

]
/
[

]
keys.
r
Press the
[
P4
]
key to store the new setting. The display indicates “- SET -”
briey, then reverts to the normal channel indication.
You may cancel the new setting by pressing the
[
P3
]
key. In this case, the dis-
play indicates “-CANCEL-” briey.
Note: If the optional
MH-75
A8J
16-Keypad Microphone is used, you may enter the
5-Tone encoding code directly from the microphone’s numeric
([
0
]
-
[
9
])
key. In
this case, you may set and cancel the setting by the microphone’s
[
C
]
(for cancel)
and
[
D
]
(for set) key.
spEEd dIal
Your Vertex Standard dealer may have pre-programmed Auto-Dial telephone num-
ber memories into your radio.
To dial a number:
In the
EVX-5300
, press, (or press and hold), the assigned
PF
key, then press the
adVancEd opEratIon