Operation Manual

EVX-5300/-5400 OpErating Manual
28
RADIO CK: You may check the radio status of the selected Contact Alias.
Press the
[
P4
]
key to transmit the radio status command to the designated
radio. If the designated radio is alive, the designated radio transmits the ACK
command, and then your radio’s display indicates “ACK RECV”. If not, your
radio’s display indicates “NO ACK”.
RADIOMON: You may monitor the situation around the designated radio by
remote control.
Press the
[
P4
]
key to remote-control the designated radio. If the designated
radio is alive, the designated radio will automatically transmit for the pro-
grammed period to transmit the situation around the radio to you. Your radio’s
display indicates “ACK RECV”, and outputs the situation around the desig-
nated radio from the speaker. If the designated radio is not alive, your radio’s
display indicates “NO ACK” and no responses.
REVIVE: You may revive the stunned radio by remote control.
Press the
[
P4
]
key to transmit the revive command to the stunned radio. When
the stunned radio receives the revive command, the stunned radio revives, and
then transmits the ACK command automatically. Your radio’s display indi-
cates “ACK RECV”. If your radio’s display indicates “NO ACK”, the revive
command did not succeed.
STUN: You may stun the designated radio forcibly by remote control.
Press the
[
P4
]
key to transmit the stun command to the designated radio. If the
designated radio is alive, the designated radio transmits the ACK command
and stuns it. If not, your radio’s display indicates “NO ACK”, the stun com-
mand did not succeed.
The stunned radio will revive by the REVIVE function described previously.
III
)
New List: This category allows you to create the desired Contact Alias and
save it into the contact list. Important Note: This function require the optional
MH-75
A8J
16-Keypad Microphone.
r
Press the
[
P4
]
key, the display indicates “ENTER ID” briey, enter the “ID
number” you wish to, using the
[
0
]
-
[
9
]
key (for select the number) and
[
A
]
/
[
B
]
key (for select the digit).
r
Press the
[
P4
]
key again, the display indicates “ENTERTAG” briey, enter
the desired “Tag Name” using the
[
0
]
-
[
9
]
key (for select the character) and
[
A
]
/
[
B
]
key (for select the digit). You may delete the current character by pressing
the
[
Ý
]
key, or insert the space by pressing the
[
#
]
key.
r
Press the
[
P4
]
key again, the display indicates “ALT SEL” briey, select the
desired alert tone using the
[

]
/
[

]
keys (or
[
P1
]
/
[
P2
]
keys).
adVancEd opEratIon