Operation Manual

EVX-5300/-5400 OpErating Manual
32
deleting the all messages by pressing the
[
P3
]
key.
WRITE: You may create a sending message and send/save it in this function if
you use with the optional
MH-75
A8J
16-Keypad Microphone. The
EVX-5400
can
memorize up to 24 messages include pre-programmed message which determined
by the CE142 Programming Software.
Create the message

Create the message using the
[
0
]
-
[
9
]
key (for select the character) and
[
A
]
/
[
B
]
keys (for select the digit). The
EVX-5400
can create up to 32 characters.
You may delete the current character by pressing the
[
Ý
]
key, or insert the
space character by pressing the
[
#
]
key.

Press the
[
D
]
key, then press the
[
A
]
/
[
B
]
keys to select the “SEND” or “SAVE”
menu depending on your purpose, and move to each step as follow.
Send the message

Press the
[
D
]
key, then press the
[
A
]
/
[
B
]
keys to select the “Call ID” you wish
to send a message.
You may enter a new “Call ID” manually by following operation:
l
Press the
[
A
]
/
[
B
]
keys to select the “MANUAL” menu which is located
at the last “Call ID” loop.
l
Press the
[
D
]
key, then enter the “Call ID” using the
[
0
]
-
[
9
]
key.

Press the
[
D
]
key again to send the message. The display indicates “TEXT
MSG” and “Call ID” alternately while sending the message.
Save the message

Press the
[
D
]
key to save the created message.
SEL MSG: You may send/edit/delete the message in this function.
Send the message

Press the
[
P1
]
/
[
P2
]
keys to select the message you wish to send.

Press the
[
P4
]
key, then press the
[
P1
]
/
[
P2
]
keys to select the “SEND” menu.

Press the
[
P4
]
key again, then press the
[
P1
]
/
[
P2
]
keys to select the “Call ID”
you wish to send a message.
If you use with the optional
MH-75
A8J
16-Keypad Microphone, you may
enter a new “Call ID” manually by following operation:
l
Press the
[
P1
]
/
[
P2
]
keys to select the “MANUAL” menu which is located
at the last “Call ID” loop.
l
Press the
[
P4
]
key, then enter the “Call ID” using the
[
0
]
-
[
9
]
key.

Press the
[
P4
]
key again to send the message. The display indicates “TEXT
MSG” and “Call ID” alternately while sending the message.
adVancEd opEratIon