Operation Manual

EVX-5300/-5400 OpErating Manual
33
adVancEd opEratIon
Edit the message
Important Note: This menu appears only when the optional
MH-75
A8J
16-Keypad
Microphone is connected, and you can not edit the message which determined by
the CE142 Programming Software.

Press the
[
P1
]
/
[
P2
]
keys to select message you wish to edit.

Press the
[
P4
]
key, then press the
[
P1
]
/
[
P2
]
keys to select the “EDIT” menu.

Press the
[
P4
]
key again, then edit the message using the
[
0
]
-
[
9
]
key (for
select the character) and
[
A
]
/
[
B
]
key (for select the digit).

Press the
[
P4
]
key, then press the
[
P1
]
/
[
P2
]
keys to select the “SAVE” menu.

Press the
[
P4
]
key again to save the edited message.
Delete the message
Important Note: You can not delete the message which determined by the CE142
Programming Software.

Press the
[
P1
]
/
[
P2
]
keys to select the message you wish to delete.

Press the
[
P4
]
key, then press the
[
P1
]
/
[
P2
]
keys to select the “DELETE”
menu.

Press the
[
P4
]
key. The display indicates “DEL Y/N”(“Y” is blinking).

Press the
[
P4
]
key again to delete the selected message. You may cancel the
deleting the message by pressing the
[
P3
]
key.
optIon sWItcH 1
Activates the optional accessory while pressing the assigned
PF
key.
optIon sWItcH 2
Press, (or press and hold), the assigned
PF
key to toggle the optional accessory “On”
and “Off”.
tx saVE dIsaBlE
Press, (or press and hold), the assigned
PF
key to disable the Transmit Saver, if
you are operating in a location where high power is almost always needed.
Press again, (or press and hold again), the assigned
PF
key, the Transmit Saver ac-
tivates to reduce the transmit power when a very strong signal from an apparently
nearby station is being received.
In the
EVX-5400
, when the Transmit Saver is “On” and “Off”, the display indi-
cates briey “TX SA ON” and “TX SAOFF”.